Guide Wires
Guide Wires
Brasseler USA Surgical is pleased to offer two partially threaded guide wires in the DePuy Synthes® compatible orthopedic accessories line. These guide wires are used to properly align screws and nails in orthopedic trauma procedures and are designed to fit in OEM procedural trays.
Brasseler USA Guide Wires
| Compatible with DePuy® Synthes® 4.0 mm Cannulated Screw | ||||
|---|---|---|---|---|
| Fabricated from 316L Stainless Steel | ||||
| Brasseler Part No. | OEM Part No. | Description | Diameter (mm) | Length (mm) |
| BR900-722 | 900.722 | Partially Threaded Guide Wire with Diamond Point | 1.25 | 150 |
| Compatible with DePuy® Synthes® Proximal Femoral Nailing Systems | ||||
|---|---|---|---|---|
| Fabricated from 316L Stainless Steel | ||||
| Brasseler Part No. | OEM Part No. | Description | Diameter (mm) | Length (mm) |
| BR357-399 | 357.399 | Partially Threaded Guide Wire with Trocar Point | 3.2 | 400 |
Steam Sterilization …. Type Minimum Temperature / Minimum Exposure Time / Minimum Dry Time
Pre-Vacuum (Wrapped) …. 270°F (132°C) / 4 minutes / 30 minutes
Gravity (Wrapped) …. 270°F (132°C) / 15 minutes / 30 minutes
- All cycles require a minimum of 30 minutes dry time.
- Observe AAMI and hospital guidelines for steam sterilization and the sterilizer manufacturer’s written instructions for cycle parameters and load configurations.